External environmental factors need to be considered when installing the inverter to ensure its normal operation and service life. Here are some common external environment requirements:
Temperature: inverters generally operate within the temperature range of 0°C to 40°C. If the ambient temperature exceeds this range, the inverter may not work properly or its life may be shortened.
Humidity: The inverter should be used in an environment with a relative humidity of less than 95%. If the ambient humidity is too high, it may cause problems such as short circuit or corrosion inside the inverter.
Wind: The inverter should be installed in a well-ventilated environment to ensure good heat dissipation and avoid direct sunlight and high temperature environments. Note that the inverter should be installed on a stable surface to ensure its stability. If installed on an unstable surface, it may be tilted or damaged by strong winds.
Dust and contaminants: The inverter should be installed in a dry and clean place to prevent dust and contaminants from entering the inside of the inverter and causing damage to the inverter.
In summary, when installing inverters, external environmental factors need to be considered based on actual conditions to ensure the normal operation and service life of the inverter.
